User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Ametek 1965:Digistrobe
DATE:                  18-Jul-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       14
NUMBER OF LINES:       113
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  IEEE         [@5335]IN
  1.003  IEEE         [@5335][TERM LF]
  1.004  END
  1.005  HEAD         INITIAL CONDITIONS
  1.006  DISP         This procedure requires this use of a
  1.006  DISP         photovoltaic cell.
  1.007  DISP         Tape the photocell to the front of the UUT.
  1.008  DISP         Connect the output of the photocell to the
  1.008  DISP         INPUT A on the HP 5335A counter
  1.009  HEAD         {}
  1.010  HEAD         {* RPM Tests *}
  1.011  HEAD         RPM Tests
  1.012  JMP          2.001
  1.013  EVAL
  2.001  DISP         Set the UUT to 29,999 RPM.
  2.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  2.002  IEEE         [@5335]TR1,AT.2;
  2.003  IEEE         [@5335][I]
  2.004  MATH         mem1 = 29999
  2.005  MEME
  2.006  MEMC         RPM            0.01% +1U
  3.001  DISP         Set the UUT to 25,000 RPM.
  3.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  3.002  IEEE         [@5335]TR1,AT.2;
  3.003  IEEE         [@5335][I]
  3.004  MATH         mem1 = 25000
  3.005  MEME
  3.006  MEMC         RPM            0.01% +1U
  4.001  DISP         Set the UUT to 20000 RPM.
  4.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  4.002  IEEE         [@5335]TR1,AT.2;
  4.003  IEEE         [@5335][I]
  4.004  MATH         mem1 = 20000
  4.005  MEME
  4.006  MEMC         RPM            0.01% +1U
  5.001  DISP         Set the UUT to 15000 RPM.
  5.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  5.002  IEEE         [@5335]TR1,AT.2;
  5.003  IEEE         [@5335][I]
  5.004  MATH         mem1 = 15000
  5.005  MEME
  5.006  MEMC         RPM            0.01% +1U
  6.001  DISP         Set the UUT to 10000 RPM.
  6.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  6.002  IEEE         [@5335]TR1,AT.2;
  6.003  IEEE         [@5335][I]
  6.004  MATH         mem1 = 10000
  6.005  MEME
  6.006  MEMC         RPM            0.01% +1U
  7.001  DISP         Set the UUT to 5000 RPM.
  7.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  7.002  IEEE         [@5335]TR1,AT.2;
  7.003  IEEE         [@5335][I]
  7.004  MATH         mem1 = 5000
  7.005  MEME
  7.006  MEMC         RPM            0.01% +1U
  8.001  DISP         Set the UUT to 3000 RPM.
  8.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  8.002  IEEE         [@5335]TR1,AT.2;
  8.003  IEEE         [@5335][I]
  8.004  MATH         mem1 = 3000
  8.005  MEME
  8.006  MEMC         RPM            0.01% +1U
  9.001  DISP         Set the UUT to 1000 RPM.
  9.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
  9.002  IEEE         [@5335]TR1,AT.2;
  9.003  IEEE         [@5335][I]
  9.004  MATH         mem1 = 1000
  9.005  MEME
  9.006  MEMC         RPM            0.01% +1U
 10.001  DISP         Set the UUT to 500 RPM.
 10.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
 10.002  IEEE         [@5335]TR1,AT.2;
 10.003  IEEE         [@5335][I]
 10.004  MATH         mem1 = 500
 10.005  MEME
 10.006  MEMC         RPM            0.01% +1U
 11.001  DISP         Set the UUT to 100 RPM.
 11.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
 11.002  IEEE         [@5335]TR1,AT.2;
 11.003  IEEE         [@5335][I]
 11.004  MATH         mem1 = 100
 11.005  MEME
 11.006  MEMC         RPM            0.01% +1U
 12.001  DISP         Set the UUT to 50 RPM.
 12.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
 12.002  IEEE         [@5335]TR1,AT.2;
 12.003  IEEE         [@5335][I]
 12.004  MATH         mem1 = 50
 12.005  MEME
 12.006  MEMC         RPM            0.01% +1U
 13.001  DISP         Set the UUT to 20 RPM.
 13.002  IEEE         [@5335]FN1,AF1,MS60,GA1;
 13.002  IEEE         [@5335]TR1,AT.2;
 13.003  IEEE         [@5335][I]
 13.004  MATH         mem1 = 20
 13.005  MEME
 13.006  MEMC         RPM            0.01% +1U
 14.001  HEAD         {}
 14.002  END